Q 235 OmRopFryslan Press Locked Steel Grating Foar Walkway Platfoarm
Beskriuwing
Press-beskoattele stielen rooster kin ek wurde neamd druk beskoattele rooster, it is makke fan lege koalstof stiel of RVS.Mei de prestaasjes fan hege draachkapasiteit, non-slip, anty-korrosje en maklik te ynstallearjen en te ferwiderjen, wurdt druk beskoattele rooster in protte brûkt foar plafonds, platfoarms, flierren, hek en alle soarten dekking yn 'e fabriken, boargerlike en kommersjele gebouwen.
Twa pars-beskoattele stielen roosters mei ferskillende gaasgrutte dy't minsken faak brûke: 33 mm × 33 mm, 33 mm × 11 mm.
Ynlieding ta de ynfoege stielen grating
De ynfoege stielen plaat, ek wol bekend as de ynfoege stielen plaat, is makke fan in bepaalde grutte fan gewoane lege koalstof platte stiel, RVS, messing plaat, aluminium plaat troch it proses fan slotting (gat), ynfoegje, welding, finishing en sa fierder.Produkt solder joint stevige, unifoarm gat ôfstân, moai design, handich en praktysk.De ynfoege stielen lattice plaat hat de skaaimerken fan hege sterkte, corrosie previnsje en ûnderhâld frij fan gewoane stielen lattice plaat, en hat de skaaimerken fan unifoarme en krekte kombinaasje, ljocht en exquisite struktuer, natuerlike harmony en elegante styl.Sawol foarrieden as keunstwurken.Is in soad brûkt.
Soart ynfoege stielen grating
Neffens ferskate ynfoegje metoaden en ynfoegje hoeken, it kin wurde ferdield yn yndrukt stielen lattice plaat, swiere lading stielen lattice plaat, yntegraal stielen lattice plaat, sunshade stielen lattice plaat, ensfh
1. Pressed type ynfoegje stielen lattice plaat: neidat de bearing platte stiel wurdt snije yn slots, de horizontale bar platte stiel wurdt yndrukt yn foarm.Algemien sprutsen, de maksimale ferwurking hichte fan de produksje fan gewoane stielen plaat is 100mm.De lingte fan de stielen plaat is meastal minder as 2000mm.
2. Heavy-duty type ynfoege stielen plaat is in soarte fan stielen plaat produkt dat wurdt foarme troch de ûnderlinge bite fan hege flakke stiel en horizontale bar platte stiel en yndrukt ûnder de druk fan 1200 ton.It is geskikt foar hege span load.
3. Yntegraal type stiel plaat De bearing flakke stiel en de horizontale bar flakke stiel fan 'e yntegraal type stielplaat hawwe deselde hichte en de snijdjipte is 1/2 fan' e bearing flakke stiel.De hichte fan 'e stielen plaat moat net grutter wêze as 100mm.De lingte fan de stielen plaat is meastal minder as 2000mm.
4. Shading type stielen roaster plaat: de bearing platte stielen plaat fan shading type stielen raster plaat is chute 30 ° of 45 °, en de groove bar is slotted en parse-locked.Neffens ferskate behoeften kinne wy oare ôfstân leverje, spesifikaasjes fan 'e rasterplaat, kinne gewoane koalstofstiel, rustfrij stiel, aluminium en oare materialen brûke.De hichte fan de grating plaat is minder as 100mm.
Gebrûk fan ynfoege stielen rooster:
In soad brûkt yn de boargerlike en kommersjele gebouwen, teaters, metro, stêd gemeentlike engineering fjild, lykas produkten mei in lichtgewicht, hege sterkte, corrosie beskerming, ûnderhâld frij, moai, en in protte oare funksjes, wurdt no in soad brûkt yn boargerlike en kommersjele gebouwen , teaters, metro, stêd en gemeentlike engineering fjild, kin brûkt wurde yn it plafond, binnen- en bûtendekoraasje dekoraasje, platfoarm gang, transom (Wells), reklame plaquette, alle soarten fan cover plaat, etc.
Ynlieding ta stielen grating:
Off ynfoege stielen grating is in soarte fan draachflak fan grutte stielen plaat produkten, it bestiet út in bepaalde grutte fan Q235 lege koalstof stiel plat troch it slot (gat), plug, welding, finishing prosessen lykas manufacturing en wurden in soarte fan stiel plaat produkten, ek kinne kieze RVS, koperen plaat, aluminium plaat foar it materiaal, dit produkt kin in soad brûkt wurde yn 'e sleat cover plaat, trap stap plaat, pool cover plaat.
De spesifikaasje fan de stielen grating
Bearing platte stielen ôfstân: 30 40 60 (mm) horizontale bar platte stielen spacing: 30 40 60 (mm) platte stielen breedte: 20-60 (mm) platte stielen dikte: 3mm 4mm 5mm ferskate spesifikaasjes kinne wurde oanpast neffens klant behoeften
De skaaimerken en tapassing fan stielen grating:
Us bedriuw produsearret de PLUG raster plaat solder joint firm, de gat ôfstân is even, it netto oerflak is flak, it ûntwerp is moai, praktysk, net allinnich meitsje foarrieden, mar ek keunstwurken, oer de jierren hat ûntwikkele hûnderten fariëteiten, eksportearje produkten begeunstige troch klanten.It wurdt in protte brûkt yn boargerlike en kommersjele gebouwen, teaters, metro, stedspoar en oare gemeentlike engineering fjilden, dat kin brûkt wurde foar suspended plafond, binnen- en bûtendekoraasje, platfoarm kuierpaad, fentilaasje finster (goed), reklame plaquette, ferskate cover platen , ensfh.
Plain type stielen roaster mei bearing bar pitch op 30mm
| Type | Widthof | Dikte | Teory | Loadand | Clearn Span | ||||||||||||||
| 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | 2600 | 2800 | 3000 | |||||
| G655/30/50 | 65 | 5 | 103.4 | U | 3990 | 997 | 443 | 249 | 159 | 110 | 81 | 62 | 49 | 39 | 32 | 27 | 23 | 20 | 17 |
| G655/30/100 | 100.4 | D | 0.11 | 0.42 | 0,95 | 1.7 | 2.65 | 3.81 | 5.22 | 6.84 | 8.7 | 10.61 | 12.82 | 15.4 | 18.18 | 21.4 | 24.18 | ||
| G605/30/50 | 60 | 5 | 95,9 | U | 3400 | 850 | 377 | 212 | 136 | 94 | 69 | 53 | 41 | 34 | 28 | 23 | 20 | 17 | |
| G605/30/100 | 92,9 | D | 0.11 | 0.46 | 1.03 | 1.84 | 2.89 | 4.15 | 5.66 | 7.45 | 9.28 | 11.78 | 14.28 | 16.73 | 20.16 | 23.23 | |||
| G555/30/50 | 55 | 5 | 88.4 | U | 2856 | 714 | 317 | 178 | 114 | 79 | 58 | 44 | 35 | 28 | 23 | 19 | 16 | ||
| G555/30/100 | 85.4 | D | 0.13 | 0.5 | 1.13 | 2 | 3.14 | 4.53 | 6.19 | 8.04 | 10.3 | 12.63 | 15.29 | 18.03 | 21.08 | ||||
| G505/30/50 | 50 | 5 | 80,9 | U | 2361 | 590 | 262 | 147 | 94 | 65 | 48 | 36 | 29 | 23 | 19 | 16 | |||
| G505/30/100 | 77,9 | D | 0.14 | 0,55 | 1.24 | 2.2 | 3.45 | 4.97 | 6.82 | 8.78 | 11.39 | 13.86 | 16.88 | 20.28 | |||||
| G503/30/50 | 50 | 5 | 52.6 | U | 1416 | 354 | 157 | 88 | 56 | 39 | 28 | 22 | 17 | 14 | 11 | ||||
| G503/30/100 | 49,6 | D | 0.14 | 0,55 | 1.24 | 2.2 | 3.43 | 4.97 | 6.65 | 8.95 | 11.16 | 14.09 | 16.37 | ||||||
| G455/30/50 | 45 | 5 | 73.4 | U | 1912 | 478 | 212 | 119 | 76 | 53 | 39 | 29 | 23 | 19 | 15 | ||||
| G455/30/100 | 70.4 | D | 0.15 | 0.61 | 1.38 | 2.45 | 3.83 | 5.56 | 7.62 | 9.73 | 12.44 | 15.76 | 18.39 | ||||||
| G405/30/50 | 40 | 5 | 65,9 | U | 1511 | 377 | 167 | 94 | 60 | 41 | 30 | 23 | 18 | 15 | |||||
| G405/30/100 | 62.9 | D | 0.17 | 0.69 | 1.54 | 2.76 | 4.31 | 6.14 | 8.37 | 11.02 | 13.92 | 17.8 | |||||||
| G403/30/50 | 40 | 3 | 43.3 | U | 906 | 226 | 100 | 56 | 36 | 25 | 18 | 14 | 11 | ||||||
| G403/30/100 | 40.3 | D | 0.17 | 0.69 | 1.54 | 2.74 | 4.32 | 6.25 | 8.39 | 11.2 | 14.21 | ||||||||
| G355/30/50 | 35 | 5 | 58.4 | U | 1156 | 289 | 128 | 72 | 46 | 32 | 23 | 18 | 14 | ||||||
| G355/30/100 | 55.4 | D | 0.2 | 0.79 | 1.77 | 3.16 | 4.94 | 7.17 | 9.61 | 12.92 | 16.24 | ||||||||
| G353/30/50 | 35 | 3 | 38.6 | U | 694 | 173 | 77 | 43 | 27 | 19 | 14 | 10 | |||||||
| G353/30/100 | 35.6 | D | 0.2 | 0.79 | 1.77 | 3.14 | 4.84 | 7.11 | 9.77 | 12.03 | |||||||||
| G325/30/50 | 32 | 5 | 53.9 | U | 967 | 241 | 107 | 60 | 38 | 26 | 19 | 15 | 11 | ||||||
| G325/30/100 | 50,9 | D | 0.22 | 0.86 | 1.94 | 3.44 | 5.35 | 7.64 | 10.42 | 14.13 | 16.81 | ||||||||
| G323/30/50 | 32 | 3 | 35.8 | U | 580 | 145 | 64 | 36 | 23 | 16 | 11 | 9 | |||||||
| G323/30/100 | 32.8 | D | 0.21 | 0.86 | 1.93 | 3.45 | 5.41 | 7.85 | 10.09 | 14.19 | |||||||||
| G255/30/50 | 25 | 5 | 43.4 | U | 590 | 147 | 65 | 36 | 23 | 16 | 12 | ||||||||
| G255/30/100 | 40.4 | D | 0.28 | 1.1 | 2.47 | 4.35 | 6.82 | 9.92 | 13.9 | ||||||||||
| G253/30/50 | 25 | 3 | 29.3 | U | 354 | 88 | 39 | 22 | 14 | 9 | |||||||||
| G253/30/100 | 26.3 | D | 0.28 | 1.1 | 2.47 | 4.43 | 6.94 | 9.35 | |||||||||||
| G205/30/50 | 20 | 5 | 36.0 | U | 377 | 94 | 41 | 23 | 15 | 10 | |||||||||
| G205/30/100 | 33.0 | D | 0.34 | 1.37 | 3.05 | 5.44 | 8.73 | 12.21 | |||||||||||
| G203/30/50 | 20 | 3 | 24.6 | U | 226 | 56 | 25 | 14 | 9 | ||||||||||
| G203/30/100 | 21.6 | D | 0.34 | 1.37 | 3.1 | 5.53 | 8.76 | ||||||||||||
1. De even load walkway plaat foar ien persoan moat wêze oer 3.0KN / m2
2. De even load kuierplaat foar in dûbele rjochting moat mear as 5.0KN / m2 wêze
3. De even load walkway plaat foar in protte minsken moat wêze oer 7.5KN / m2
Plain type stielen rooster mei draachbalke op 40mm
| Type | Widthof | Dikte | Teory | Loadand | Clear Span | ||||||||||||||
| 200 | 400 | 600 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | 2600 | 2800 | 3000 | |||||
| G655/40/50 | 65 | 5 | 81.7 | U | 2992 | 748 | 332 | 187 | 119 | 83 | 61 | 46 | 36 | 29 | 24 | 20 | 17 | 15 | |
| G655/40/100 | 78,7 | D | 0.11 | 0.42 | 0,95 | 1.7 | 2.65 | 3.84 | 3.93 | 6.78 | 8.54 | 10.54 | 12.84 | 15.25 | 17.97 | 21.46 | |||
| G605/40/50 | 60 | 5 | 75,9 | U | 2550 | 637 | 283 | 159 | 102 | 70 | 52 | 39 | 31 | 25 | 21 | 17 | 15 | ||
| G605/40/100 | 72.9 | D | 0.11 | 0.46 | 1.03 | 1.84 | 2.89 | 4.12 | 4.27 | 7.32 | 9.36 | 11.57 | 14.31 | 16.54 | 20.21 | ||||
| G555/40/50 | 55 | 5 | 70.1 | U | 2142 | 535 | 238 | 133 | 85 | 59 | 43 | 33 | 26 | 21 | 17 | 14 | |||
| G555/40/100 | 67.1 | D | 0.13 | 0.5 | 1.13 | 2 | 3.13 | 4.51 | 4.59 | 8.05 | 10.22 | 12.66 | 15.11 | 17.77 | |||||
| G505/40/50 | 50 | 5 | 64.2 | U | 1770 | 442 | 196 | 110 | 70 | 49 | 36 | 27 | 21 | 17 | 14 | ||||
| G505/40/100 | 61.2 | D | 0.14 | 0,55 | 1.24 | 2.2 | 3.43 | 5 | 5.12 | 8.79 | 11.02 | 13.69 | 16.64 | ||||||
| G503/40/50 | 50 | 3 | 42.6 | U | 1062 | 265 | 118 | 66 | 42 | 29 | 21 | 16 | 13 | 10 | |||||
| G503/40/100 | 39.6 | D | 0.14 | 0,55 | 1.24 | 2.2 | 3.43 | 4.94 | 4.99 | 8.71 | 11.4 | 13.49 | |||||||
| G455/40/50 | 45 | 5 | 58.4 | U | 1434 | 358 | 159 | 89 | 57 | 39 | 29 | 22 | 17 | 14 | |||||
| G455/40/100 | 55.4 | D | 0.15 | 0.61 | 1.38 | 2.44 | 3.83 | 5.46 | 5.67 | 9.85 | 12.28 | 15.53 | |||||||
| G405/40/50 | 40 | 5 | 52.6 | U | 1133 | 283 | 125 | 70 | 45 | 31 | 23 | 17 | 13 | 11 | |||||
| G405/40/100 | 49,6 | D | 0.17 | 0.69 | 1.54 | 2.74 | 4.32 | 6.2 | 6.42 | 10.88 | 13.45 | 17.47 | |||||||
| G403/40/50 | 40 | 3 | 35.3 | U | 680 | 170 | 75 | 42 | 27 | 18 | 13 | 10 | |||||||
| G403/40/100 | 32.3 | D | 0.17 | 0.69 | 1.54 | 2.74 | 4.32 | 6.01 | 6.08 | 10.71 | |||||||||
| G355/40/50 | 35 | 5 | 46.8 | U | 867 | 216 | 96 | 54 | 34 | 24 | 17 | 13 | |||||||
| G355/40/100 | 43.8 | D | 0.2 | 0.78 | 1.77 | 3.16 | 4.88 | 7.18 | 7.12 | 12.48 | |||||||||
| G353/40/50 | 35 | 3 | 31.6 | U | 520 | 130 | 57 | 32 | 20 | 14 | 10 | 8 | |||||||
| G353/40/100 | 28.6 | D | 0.2 | 0.79 | 1.75 | 3.12 | 4.79 | 7 | 7.01 | 12.85 | |||||||||
| G325/40/50 | 32 | 5 | 43.3 | U | 725 | 181 | 80 | 45 | 29 | 20 | 14 | 11 | |||||||
| G325/40/100 | 40.3 | D | 0.21 | 0.86 | 1.93 | 3.45 | 5.45 | 7.84 | 7.7 | 13.86 | |||||||||
| G323/40/50 | 32 | 3 | 29.4 | U | 435 | 108 | 48 | 27 | 17 | 12 | 8 | ||||||||
| G323/40/100 | 26.4 | D | 0.21 | 0.86 | 1.93 | 3.45 | 5.34 | 7.86 | 7.37 | ||||||||||
| G255/40/50 | 25 | 5 | 35.1 | U | 442 | 110 | 49 | 27 | 17 | 12 | 9 | ||||||||
| G255/40/100 | 32.1 | D | 0.27 | 1.1 | 2.48 | 4.35 | 6.74 | 9.94 | 10.46 | ||||||||||
| G253/40/50 | 25 | 3 | 24.3 | U | 265 | 66 | 29 | 16 | 10 | 7 | |||||||||
| G253/40/100 | 21.3 | D | 0.27 | 1.1 | 2.45 | 4.3 | 6.63 | 9.71 | |||||||||||
| G205/40/50 | 20 | 5 | 29.3 | U | 283 | 70 | 31 | 17 | 11 | 7 | |||||||||
| G205/40/100 | 26.3 | D | 0.34 | 1.36 | 3.08 | 5.37 | 8.56 | 11.46 | |||||||||||
| G203/40/50 | 20 | 3 | 20.6 | U | 170 | 42 | 18 | 10 | 6 | ||||||||||
| G203/40/100 | 17.6 | D | 0.34 | 1.37 | 2.98 | 5.28 | 7.84 | ||||||||||||
Notysjes:
1. U: feilich en unifoarm ferdield load, KN / m2
2. D: de maksimale deflection oerienkomt mei de neamde feilige lading
3. Teoretysk gewicht is it gewicht fan 1m lingte fan hot dip galvanized grating
Plain styl bearing bars op 60mm pitch stielen grating
| Type | lager | Krús | Teory | Serrationfactor | Loadand | ClearSpan | ||||||||||||||||
| Lade | Deflection | 150 | 300 | 450 | 600 | 750 | 900 | 1050 | 1200 | 1500 | 1800 | 2100 | 2400 | 2700 | 3000 | 3300 | 3600 | |||||
| G655/60/50 | 65x5 | 50 | 49,0 | 0.92 | 1.04 | U | 3436.41 | 858.79 | 381.42 | 214.34 | 137.01 | 95,00 | 69.67 | 53.23 | 33.89 | 23.39 | 17.06 | 12.95 | 10.13 | 8.12 | 6.62 | 5.49 |
| D | 0.06 | 0.24 | 0,55 | 0.99 | 1.54 | 2.22 | 3.03 | 3.96 | 6.18 | 8.91 | 12.12 | 15.84 | 20.02 | 24.75 | 29.94 | 35.64 | ||||||
| G555/60/50 | 55x5 | 50 | 42.4 | 0,90 | 1.05 | U | 2460.46 | 614.8 | 273.02 | 153.99 | 98.02 | 67.94 | 49.81 | 38.04 | 24.20 | 16.68 | 12.14 | 9.20 | 7.18 | 5.47 | 4.67 | 3.86 |
| D | 0.07 | 0.29 | 0.65 | 1.17 | 1.82 | 2.63 | 3.58 | 4.68 | 7.31 | 10.53 | 14.33 | 18.72 | 23.69 | 29.25 | 35.39 | 42.12 | ||||||
| G505/60/50 | 50x5 | 50 | 39.0 | 0.89 | 1.06 | U | 2033.40 | 508.06 | 225,60 | 126.73 | 80.97 | 56.11 | 41.13 | 31.40 | 19.96 | 13.74 | 10.00 | 7.56 | 5,90 | 4.70 | 3.82 | |
| D | 0.08 | 0.32 | 0.72 | 1.28 | 2.01 | 2.89 | 3.94 | 5.14 | 8.04 | 11.58 | 15.76 | 28.59 | 26.06 | 32.17 | 38.93 | |||||||
| G455/60/50 | 45x5 | 50 | 35.7 | 0.88 | 1.07 | U | 1647.01 | 411.49 | 182.69 | 102.61 | 65.54 | 45.41 | 33.27 | 25.39 | 16.12 | 11.09 | 8.06 | 6.09 | 4.73 | 3.77 | 3.05 | |
| D | 0.08 | 0.35 | 0,80 | 1.43 | 2.23 | 3.21 | 4.37 | 5.72 | 8.93 | 12.87 | 17.51 | 22.88 | 28.95 | 35.75 | 43.25 | |||||||
| G405/60/50 | 40x5 | 50 | 32.3 | 0.87 | 1.07 | U | 1301.30 | 325,0 | 9144.31 | 81.03 | 51.75 | 35.84 | 26.25 | 20.02 | 12.70 | 8.72 | 6.32 | 4.77 | 3.70 | 2.94 |
|
|
| D | 0.10 | 0,40 | 0,90 | 1.60 | 2.51 | 3.62 | 4.92 | 6.43 | 10.05 | 14.47 | 19.70 | 25.74 | 32.57 | 40.12 |
|
| ||||||
| G403/60/50 | 40x3 | 50 | 21.7 | 0.87 | 1.07 | U | 780.76 | 195.3 | 86.56 | 48,60 | 31.02 | 21.48 | 15.72 | 11.99 | 7.60 | 5.21 | 3.77 | 2.84 | 2.20 | 1.74 | ||
| D | 0.10 | 0,40 | 0,90 | 1.60 | 2.51 | 3.62 | 4.92 | 6.43 | 10.05 | 14.47 | 19.70 | 25.74 | 32.57 | 40.21 | ||||||||
| G325/60/50 | 32x5 | 50 | 27.0 | 0.83 | 1.09 | U | 832.77 | 207.99 | 92.29 | 51.80 | 33.06 | 22.87 | 16.74 | 12.75 | 8.06 | 5.52 | 3.98 | 2.99 | 2.31 |
| ||
| D | 0.12 | 0,50 | 1.13 | 2.01 | 3.14 | 4.52 | 6.15 | 8.04 | 12.56 | 18.09 | 24.63 | 32.1 | 740.72 |
| ||||||||
| G323/60/50 | 32x5 | 50 | 18.5 | 0.83 | 1.09 | U | 499.64 | 124.77 | 55.35 | 31.06 | 19.81 | 13.70 | 10.02 | 7.63 | 4.81 | 3.29 | 2.37 | 1.77 | 1.36 |
| ||
| D | 0.12 | 0,50 | 1.13 | 2.01 | 3.14 | 4.52 | 6.15 | 8.04 | 12.56 | 18.09 | 24.63 | 32.17 | 40.72 |
| ||||||||
| G255/60/50 | 25x5 | 50 | 22.3 | 0.79 | 1.12 | U | 508.22 | 126.89 | 56.27 | 31.56 | 20.12 | 13,90 | 10.16 | 7.72 | 4.86 | 3.31 | 2.37 | 1.77 |
|
| ||
| D | 0.16 | 0.54 | 1.44 | 2.57 | 4.02 | 5.79 | 7.88 | 10.29 | 16.08 | 23.16 | 31.55 | 41.18 |
|
| ||||||||
| G253/60/50 | 25x3 | 50 | 15.7 | 0.79 | 1.12 | U | 304.91 | 76.15 | 33.74 | 18.91 | 12.05 | 8.32 | 6.07 | 4.61 | 2.89 | 1.96 | 1.40 | 1.04 |
|
| ||
| D | 0.16 | 0.64 | 1.44 | 2.57 | 4.02 | 5.79 | 7.88 | 10.29 | 16.08 | 23.16 | 31.53 | 41.18 |
|
| ||||||||
| G205/60/50 | 20x5 | 50 | 19.0 |
| U | 325.22 | 81.16 | 35.97 | 20.15 | 12.83 | 8.85 | 6.45 | 4,90 | 3.07 | 2.07 | 1.47 |
|
|
| |||
| D | 0.20 | 0,80 | 1.81 | 3.21 | 5.02 | 7.23 | 9.85 | 12.87 | 20.10 | 28.95 | 39.41 |
|
|
| ||||||||
Notysjes:
1. U: feilich en unifoarm ferdield load, KN / m2
2. D: de maksimale deflection oerienkomt mei de neamde feilige lading
3. Teoretysk gewicht is it gewicht fan 1m lingte fan hot dip galvanized grating